Ford 9 Inch 1310-Series Short/Small Pinion Yoke, 28-Spline

• Popularity - 2008 views, 286.9 views per day, 7 days on eBay. Super high amount of views. 15 sold.
• Price - Avg: $0.00, Low: $0.00, High: $0.00. Best quality when compared to PicClick similar items.
• Seller - + items sold. 0% negative feedback. Great seller with very good positive feedback and over 50 ratings.

It is a re-creation of the original Ford 9-inch “short” pinion yoke, Made out of forged carbon steel for strength and durability, The use or modern forged steel offers far more value than a junkyard yoke, Features a machined relief cut to clear standard and Daytona pinion supports, Will fit all 28 spline 1.218” Ford 9-inch pinion gears<br>Ford 9 Inch 1310-Series Short/Small Pinion Yoke, 28-Spline<br>Sku # 80292417<br>Mfr. Part # 80292417<br>Condition<br>New<br>Brand<br>Speedway Motors<br>Sold<br>Each<br>Details<br>Notes<br>We recommend that this yoke be installed with a pinion spacer and shim kit (9190921) and a new pinion nut (9196887) torqued to 175 ft lbs.<br>Info<br>Stop scrounging the junkyard for those hard to find Ford pinion yokes. Whether you’re rebuilding a stock unit for your favorite old Ford, or putting the final touches on that “bullet-proof” Ford 9-inch third member build, start fresh and save time with a new Speedway Motors Forged Short Pinion Yoke.<br>We replicated the original “short” 4-inch length yoke found on many late model Ford cars and trucks and updated it using modern forged carbon steel. Whether you’re restoring a vintage 1950’s-80’s Ford or Mercury to OEM specs or hooking up that ground-pounding, high-horsepower custom build – our forged pinion yoke can handle it.<br>This yoke will fit any Ford 9-inch with a 28-spline, 1.218” diameter pinion gear, and uses common 1310 series U-joints (91048315). Machined relief cut provides for simple, bolt-on installation when used with an OEM standard or our Daytona-style pinion support (91048399) on your Ford 9-inch third member assembly.<br>Step up to a modern, easy-to-install and durable solution for your Ford 9-inch rebuild by choosing a Forged Pinion Yoke from Speedway Motors.<br>Re-creation of the original Ford 9-inch “short” pinion yoke<br>Made out of forged carbon steel for strength and durability<br>Modern forged steel offers far more value than a junkyard yoke<br>Machined relief cut to clear standard and Daytona pinion supports<br>Fits all 28 spline 1.218” Ford 9-inch pinion gears<br>Uses common 1310 series U-joints<br>Specs<br>Thickness of ear where u-bolts go through is .818" or 13/16"<br>Depth from face to bottom of u-joint cap recess is .520 or 1/2" plus<br>Space between ears where u-joint caps fit is 3.211" or 3-3/16" plus<br>Overall length is 4"<br>Outside diameter at seal area is 1.813"<br>Center to center of u-bolt holes is 1.415"<br>Application<br>This Part Fits<br>This pinion yoke is an OEM replacement for the following year/make/models listed:<br>1966-86 Bronco<br>1964-77 Comet<br>1967-79 Cougar<br>1968-83 E-100 1/2 ton<br>1979-88 E-150 1/2 ton<br>1968-74 E-200 3/4 ton<br>1957-83 F100<br>1968-87 F150<br>1957-71 Fairlane<br>1960-70 Falcon<br>1959-74 Galaxy<br>1975-79 Granada<br>1975-80 Grand Marquis<br>1965-79 LTD<br>1968-71 Mark III<br>1970-78 Maverick<br>1965-73 Mustang<br>1957-79 Ranchero<br>1955-79 Thunderbird<br>1968-76 Torino/ Grand Torino<br>WARNING: Cancer and Reproductive Harm -- p65Warnings.ca.gov<br>Specs<br>Sold in Quantity<br>Each<br>Finish<br>Natural<br>Spline Count<br>28<br>Yoke U-Joint Series<br>1310<br>Material Type<br>Forged Steel<br>MFG. Part #<br>80292417<br>Yoke Width<br>3-7/32"<br>Yoke Style<br>Bolt On<br>Spline OD<br>1.218<br>Reviews<br>Parts were great!<br>Rated<br>by Woody on January 20, 2021<br>Summary:<br>Product was just what was required.<br>Yes, I recommend this product.<br>i would buy this product again<br>Rated<br>by kens classic on September 08, 2020<br>Summary:<br>good product and as described<br>Yes, I recommend this product.<br>Great price and quality part<br>Rated<br>by David on August 1